Steel coil slitting machineis a high speed line, to match the large quantity production needs.
This machine is main make the big width coil slit to small strips.
small simple glavanized stainless steel slitter and cutter slitting machine equipment's technical parameter
| Model | Manual slitting machine |
| material | Stainless steel |
| Warrant | 1 year |
| Use of machine | Coil slitting |
| Line speed | 10-12/min |
| power | electric |
| Feeding width | 600-1250mm |
| Power of motor | 3KW |
| shaft diameter | 60mm(or as customer's demand) |
| color | any |
| Step of forming roller | 13 |
| Material of frame | 80mm H shape steel welding |
| Thickness of middle plate | 12mm |
| Drive type | Drive by chain |
| chain | 19.05mm |
| weight | About 0.9T |
| Appearance size | 1.5m (length)*1.0m (width) *1.2m (height) |
| Package | shipping package, if have special requirement, add package charge |
The whole production line include the 15 Tons hydraulic decoiler with loading car one set, slitting machine one set,scrap winder two sets, tension stand one set, and automatic recoiler one set. Before the installation,we will provide the fundation drawing, and the customer prepare the foundation as the drawing.
My engineer will install the machine overseas and training the workers how to start the machine,change the slitting blade, and other adjustment.
To make the coil material feed into the slitting machine and tension machine smoothly, need make two storage pits on the ground.
Here please check some main machine units as below:
Slitting machine of the steel coil slitting machine:
ower part: This is composed of power-stand, 650decelerator, 45KW direct current motor,
gear distributing case, coupler, spindle, connecting-cover, etc. Â
Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot(φ180mm, 2pcs),movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device,accompany of  blade, separating cover, rubber band and 10 blades with the machine
It change the blades through moving out the bracket hydraulically and is very convenient and fast
The scrap winder of the steel coil slitting machine:Â
It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, 350 decelerator and 7.5Kw electric machine.
The tension stand of the steel coil slitting machine:
This is composed of frame, preliminary dividing shaft, bracket, pressing shaft, hydraulic damping device,lifting and pressing device for pressing shaft, set of dividing slice and cover, etc. Â
 Block device: hydraulic drives it up and down according to the material thickness.
Three hydraulic cylinders to make the pressure adjustable so that it can make the different thickness material's tension power.
It also can ensure the recoiling quality.
we also supply large slitting lilne as below:
This is composed of frame, bearing-stand, recoiling shaft, expand recoiling device and plate,
movable supporting stand, accompany of decelerator, direct-current speed adjustable motor: 85KWÂ and direct-current electronic cabinet, etc. Â
Designed with the seamless expand and shrink structure and hydraulic clip-mouth so that when the heads feed into the clip-mouth, it will close automatically and start winding.
Contact Us
About the steel coil slitting machine,If you have any need and questions ,please don't hesitate to contact us .
Â
Cross Roller Bearing is a special type bearing. Because of the inner ring or outer ring were separated, after loading the roller and the cage, it is fixed with the cross roller shaft ring to prevent the separation, so the operation is simple when installing the cross roller shaft ring. Since the rollers are intersected, only one set of cross roller bearings can withstand the load in each direction, which is three to four times more rigid than the traditional model. At the same time, because the inner ring or outer ring of the cross Roller Bearing is a two-part structure, the bearing clearance can be adjusted, and even if it is preloaded, it can obtain a high-precision rotary motion. Moreover, because of its special structure, it is commonly used in industrial robots as joint bearings.
The classification and model series of cross roller bearings are below:
RB type (outer ring segment)
RB series models for cross roller bearing, basic, inner and outer ring size is minimal to miniaturization, its structure is the outer ring is divided, the inner ring design is an organic whole, the inner ring spinning of high precision parts suitable for requirements.
RE type (inner ring segment)
The RE series is a new type of XRB design concept, which is the same size as the XRB type.The structure of the inner ring is the split type and the outer ring is one design, which is suitable for the parts with high rotating precision of outer ring.
RU type (inner and outer circle)
The RU series model is not required to be fixed flange and support base due to the processing of mounting holes.In addition, due to the adoption of the integrated inner and outer ring structure of the belt, the installation has little effect on the performance, thus achieving stable rotation precision and torque.Can be used for outer ring and inner ring rotation.
RBC type (outer ring segment)
The RBC series model (corresponding to the CRBC series of IKO company) is composed of the outer ring is the split type, the inner ring is one design, and the belt is fully loaded with roller bearings.Suitable for high rotation accuracy of inner ring.
CRBH type (inner and outer ring)
CRBH series model, outer ring and outer ring are integral structure, used for outer ring and inner ring rotation.
RA type (outer circle segmentation, ultrathin type)
The RA series model is the compact type that reduces the thickness of RB and outer ring to the limit.Suitable for areas with light weight and compact design, such as rotating parts of robot and manipulator.
SX type (outer ring segment)
The structure of SX series is similar to that of RB series. The outer ring is a two-part structure, which is designed with three spring card rings and the inner ring, which is suitable for the place where the inner ring has high rotation precision.
XRU08 type (inside and outside)
XSU08 series is similar to the RU series, and the inner and outer rings have been machined with holes, so no fixed flange and support seats are required.Due to the adoption of the integrated inner and outer ring structure, the installation has little effect on the performance, thus achieving stable rotation precision and torque.Can be used for outer ring and inner ring rotation.
We believe that we can supply the best service and price for your, hope to make a long-term cooperation with you. If you have any question please do not hesitate contact with us. We keep warmly welcome you visit us in any time.
Cross Roller Bearing
Cross Roller Bearing,Excavator Parts Cross Roller Bearings,High Precision Cross Roller Bearing,Thin Section Cross Roller Slewing Bearing
LUOYANG AUTO BEARING CO.,LTD , http://www.lyautobearing.com