Model NO.: STWYX24-210-840
Thickness of Raw Material: 0.3-0.8mm
Yield Strength of Material: 235MPa
Working Speed: About 1500-2000 mm/Min
Type: Metal Tile Forming Machine
Method: Roll Forming
Processing: Roll Forming
Product: Tile
Brick Raw Material: Steel
Automation: Automatic
Trademark: STW
Transport Package: Naked Machine Body Load in 40′ Container
Specification: CE
Origin: Zhejiang, China
HS Code: 88452210
1-Product Feature of The colored steel tiles produced by this machine look beautiful ,elegant and noble .They are widely used as the roof of garden ,factory ,hotel,exhibition center and villa ,etc .
| No. |       item | Parameter(all is subject to our final design) | |
|
1 Â |
Suitable raw material | Type | Common galvanized & pre-painted steel |
| Yield strength | 235MPa(or other high strength steel) | ||
| Thickness(mm) | 0.4-0.7 | ||
| width(mm) | According to final design | ||
| 2 | Manual uncoiler's capacity | Max.5tons | |
| 3 | Forming speed(m/min) | About 18-20m/min | |
| 4 | Main motor power(KW) | 7.5kw | |
| 5 | Hydraulic power(KW) | 3kw | |
| 6 | Forming roller groups | Around19-20 groups | |
| 7 | Raw material of forming roller | High quality No.45 steel | |
| 8 | Raw material of cutting blade | Cr12mould steel with quenched treatment | |
| 9 | controlling system | Mitsubishi PLC& converter | |
| 10 | Suitable industrial voltage |  According to your special requirement | |
| 11 | Machine dimensions(L*W*H) | 6.8m×1.8m×1.52m | |
| 12 | Machine weight | About 9-10tons | |
Â
Â
2-Machine componentsÂ
Tile forming machine consist of uncoiler, coil sheet guiding machine ,covering film device ,main roll forming system, pressing device,cutting device,Hydraulic station ,PLC control system and support table .
3.Working flow
uncoiling the sheet---guiding the sheet---covering the film---roll forming punching the step---measuring the length---cutting the panel---panels to the supporter
Shenzhen Runpeng Precision Hardware Co., Ltd. , http://www.szdiecasting.com