The E71(6110)-LNG engine independently developed by Hefei Baofa Power Technology Co., Ltd. has successfully passed the test of the 7-ton forklift truck of Anhui Forklift Co., Ltd., a well-known domestic forklift listed company in the forklift industry. This gas engine is mainly equipped with 5 to 10 tons of forklift trucks, filling the gap in the Chinese market of 5 to 10 tons forklift ignition engines.
E71(6110)-LNG is a joint development of Baofa and Xichai. It was developed on the basis of Xican 6110 diesel engine. It adopts ECU to control multi-point sequential injection single-cylinder ignition technology, with precise control, low fuel consumption, and engine. The performance parameters are not lower than that of the diesel engine of the same model. The control technology of the large-tonnage forklift ignition engine is the leading technology. This engine was successfully installed on the Heli brand forklift and enriched the product range of Baofa.
At present, Hefei Baofa is developing 4 to 7 tons of electric-injection gasoline engines for forklifts, which can meet the market for ignition engines of 4 to 7 ton forklifts and can be used in the applications of gasoline, natural gas, and liquefied gas forklifts. At this point, Baofa's engine products can meet the market of ignited engines for 1 to 10 tons of forklifts.
About Baofa:
Hefei Baofa Power Technology Co., Ltd. is an R&D and manufacturing enterprise that replaces clean fuel in the field of gas engines, and is dedicated to implementing the national energy-saving emission reduction and clean energy development and utilization. Baofa Power is principally engaged in the development and production of multi-point electronic fuel injection gasoline and gas engines for forklifts. (This article from Hefei Baofa)
E71(6110)-LNG is a joint development of Baofa and Xichai. It was developed on the basis of Xican 6110 diesel engine. It adopts ECU to control multi-point sequential injection single-cylinder ignition technology, with precise control, low fuel consumption, and engine. The performance parameters are not lower than that of the diesel engine of the same model. The control technology of the large-tonnage forklift ignition engine is the leading technology. This engine was successfully installed on the Heli brand forklift and enriched the product range of Baofa.
At present, Hefei Baofa is developing 4 to 7 tons of electric-injection gasoline engines for forklifts, which can meet the market for ignition engines of 4 to 7 ton forklifts and can be used in the applications of gasoline, natural gas, and liquefied gas forklifts. At this point, Baofa's engine products can meet the market of ignited engines for 1 to 10 tons of forklifts.
About Baofa:
Hefei Baofa Power Technology Co., Ltd. is an R&D and manufacturing enterprise that replaces clean fuel in the field of gas engines, and is dedicated to implementing the national energy-saving emission reduction and clean energy development and utilization. Baofa Power is principally engaged in the development and production of multi-point electronic fuel injection gasoline and gas engines for forklifts. (This article from Hefei Baofa)
Related news: Forklift truck LNG engine
A coffee grinder with a cone-knife grinder places a conical knife disk at the bottom of the machine, and then cooperates with the outer ring knife disk for grinding. The coffee powder produced in this way will be closer to granular, and at the same time, the water absorption path of the coffee particles will become longer, and it will take more time for the inside to contact the water, which will result in the coffee powder being released within the first time. The soluble substances are less, and the concentration will not be too high in a short time.
Conical Coffee Grinder,Conical Burr Coffee Grinder,Small Conical Burr Coffee Grinder,Brim Burr Coffee Grinder
Zhongshan Dippers Electric Co., Ltd. , https://www.cndippers.com