1- Body/Bonnet:GGG40/50
2- Stem:SS420/431
3- Bolts/Nuts:SS304
4- DISC:GGG40/50 +Â EPDM Coating
5- Epoxy Resin coating internal &Â external, thickness above 300 micron
7- Flanged acc to BS4504, ISO 7005.Face to Face acc.To BS 5153, DIN 3352
8- Work pressure:PN10/16;Size range:1", 1Â 1/2", 2" to 24"
WALTER-FSV Company supply OEM Service for, Double Flange Check Valve, Swing Check Valve, Rubber Flap Check Valve, Silent Check Valve, Butterfly Check Valve.
The hot oil boiler has been manufactured as radiation-type; Hot oil boiler have spiral oil pipes, from seamless steel boiler tube, wrapped up with one-, two- or three-way screw-steps depending upon the capacity and the velocity values, the flow of the gases have been designed as three-directional. The most critical place in all the installment is the hot oil boiler serpentines, since this is the hottest place. The other parts of the installment are less hot as compared to here, due to this reason, the velocity of oil at the serpentines have been adjusted according to the number of tubes openings at the manufacture. Since all the oil inside the system passes from the boiler spirals, the flow is fully under control. Thus, the safely heating of the heat carrier is obtained.
Hot Oil Heater,Hot Oil Heater Boiler,Industrial Hot Oil Boiler,Low Pressure Hot Oil Boiler,Hot Oil Boiler System
Henan Yuanda Boiler Co., Ltd. , https://www.industrys-boiler.com