Nonferrous Metal Spectrometer in Wide Measuring

Specification
CMOS -based, spark discharge, metal detection
Ultra-low limits of detection
High integration, reliability, stability
Energy saving 50%, material saving
Lowing operating cost
Small size, light weight, easy to move and install
Multi-substrate upgrade easy, without changes to increase the hardware

Summary
W5 Optical Emission Spectrometer bring in the advanced technology from Europe. It is the 4^th generation Arc/Spark-OES with high performance lowing operating cost for metal analysis and this is the latest research and development of detection equipment. The overall optical design has been enhanced, and with improvements of CMOS technology used to further improve the performance of the W5 while retaining the major benefit of earlier units. The CMOS spectrometer is not only contain the full spectrum characteristics of CCD spectrometer but also the extremely low detection limit for non-metallic elements such as C, S, P, B, As, N etc. The operation is simple and easy to learn. The test result is stable and accuracy. It is a good choice of all common metals for incoming and outgoing product quality control.

Application
W5 Optical Emission Spectrometer(spark OES) is used for applications in metal elemental analysis, trace element analysis for science and industry like Metallurgy, Foundry, Mechanical Engineering, Scientific Research, Product Inspection, Automobile, Petrochemical Engineering, Shipbuilding, Electrics, Aerospace, Nuclear Power, Metallic and Nonferrous Metallic Smelting, Processing and Recycling. It is including full element analysis range, but at same time the element analysis amount can be bespoke.

Detection Matrices:
Iron(Fe) and its alloys (Steel alloy, Cast iron, Fe-Low alloy, Fe-Cr steel, Fe-Cast iron, Fe-Cr-cast, Fe-Mn steel, Fe-Tool steel etc.)
Aluminium(Al) and its alloys (Al-Si alloy, Al-Zn alloy, Al-Cu alloy, Al-Mg alloy, Pure-Al alloy etc)
Copper(Cu) and its alloys (Brass, Copper-Nickel-Zn, Aluminum Bronze, Tin-lead Bronze, Red Copper, Be-Bronze, Si-Bronze etc)
Nickel(Ni) and its alloys (Pure Ni, Monel metal, Hadtelloy Alloy, Incoloy, Inconel, Nimonic etc)
Cobalt(Co) and its alloys (Co-orientation, Low Co alloy, Stellite 6,25,31, Stellite 8,WI 52, Stellite 188, F)
Magnesium(Mg) and its alloys (Pure Mg, Mg/Al/Mn/Zn-alloys)
Titanium(Ti) and its alloys
Zinc(Zn) and its alloys
Lead(Pb) and its alloys
Tin(Sn) and its alloys
Argentum(Ag) and its alloys
Small sample, special size sample and wire detection

Features

1. It can detect elements including that C, P, S, N and it is suitable for a variety of metal base. Such as iron-based, aluminum base, copper base, nickel base, chromium base, titanium base, magnesium base, zinc base, Tin base and lead-based. Full spectrum technology covers the whole range of elemental analysis, the customers can choose channel elements by themselves.
2. The rate of analysis is fast, all elements in the channel can be tested within 20s. According to different analysis materials, the instrument can arrive better analysis results in short time by setting the pre-burn time and marking line.
3. The optical system adopts vacuum constant temperature light room, it can realize that light path through, to eliminate optical path loss, to improve test limit, and the results of test is more accurate, its reproducibility and long-term is perfect.
4. The construction of light room, it makes vacuum room's volume small, the rate of vacuum arrives half of the normal spectrometer's.

Its optical path automatically calibrated and optical system automatically goes on line scan, it ensures that receiving is right and to eliminate complex the crest scan job. The instrument can automatically identify specific lines and compare with the old one, it can ensure the drift position and to find out the analysis line's present location of pixel.

1. The open electrode frame design, it can adjust sample folder so as to analyze all kinds of shapes and sizes.
2. The working curve adopts international sample, it was pre-made the working curve, according to its needs to extend the range, every curve is made of more 10 samples to generate and automatically eliminate interference.
3. HEPS is suitable for all kinds of materials.
4. Solid absorption trap can prevent oil and gas from polluting the light chamber and improve its stability.
   9. The base made in copper spark, and to improve heat dissipation and sturdy performance.
5. The design argon gas circuit is reasonable, it makes argon washing's time is shorten when the sample excitation. In order to save argon for customers, this kind of design is very reasonable.
6. It adopts tungsten material electrode, it makes electrode longer life, the electrode has the purge function automatically, it is easier to clean up the electrode.
7. High-performance DSP and ARM processor,, it has high speed data collection and control function. And it can detect the model of room temperature, vacuum temperature, argon pressure, light source's conditions.
8. The instrument and computer adopt ether net to connect, the anti-jamming performance is better, the external computer upgrade is related to configuration of instrument, so the instrument has a better applicability.
9. The core device are all original imported, in order to promise the products' quality.

Parameters
Company information
Jinyibo is leading manufacturer of CCD Optical Emission Spectrometer, Aluminum Alloy Analyzer, Carbon and Sulfur Analysis Instruments , XRF Spectrometers, ICP Spectrometers. Our customers list covers the spectrum from small to large international companies in many different industries. JINYIBO is proud to be a vital partner in providing quality products to improve both safety and offer superior analysis to our customers.
For now, our spectrometer products capture about 30% of the market in China, totally over 6500 sets instrument come in to use globally. Customers include Shell Group of Companies, Hyundai Group, South Korea POSCO, DAEWOO, Shagang Group, SANY, BYD, SINOPEC, GREE, Chinalco, WEIFU, Xiamen Tungsten, Nissan
Customers coverage United States, South Korea, Malaysia, Turkey, Brazil, Chile, India, Iran, Vietnam, Ghana, Afghanistan, Indonesia, Taiwan, Hong Kong etc.
Every day, more than 2.56 enterprises select Jinyibo Instrument all over the word. We are seeking  professional partners or distributors to service our end user and share the analytical instrument market.Hope you can be next partners whom we share markets with.
We focus on innovation of advanced products and manufactured them to be very high quality. Precise Instruments, Perfect Experience are always our top priority. 
We will spare no effort to deliver the best analytical instruments to meet your demands.
To be the preferred supplier of analytical instruments globally.

Our Customers


Certifications

Contact


 

Sawdust making machineDiscription

1. Sawdust Pellet Machine is a machine which our factory latest researched and developed.

2. Advantages of this type machine: reasonable design, low loss, low noise, no pollution, easy operation.

3. As soon as launching on the market, this machine occupies a leading position in the wood flour machine market.

Functions and usage of Sawdust Making Machine

 

1.Use the Wood Crusher to crush wood into sawdust;

2.Use the sawdust dryer to take out the moisture of sawdust;

3.Use the Sawdust Forming Machine to press sawdust into stick;

4.Use the wood charcoal bake stove to bake the stick into charcoal;

5.Then use the wood Crusher again to break the charcoal into powder;

6.Use the powder molding machine to press the charcoal powder into all kinds of shape(you can customize many kinds of mould);

7.Use the packing machine to package the shaped charcoal.

You can choose it base your raw material,final product and wantedcapacity

Sawdust Machine

Sawdust Machine,Sawdust Making Machine,Sawdust Crusher Machine,Sawdust Chipper Machine

Henan Hongke Heavy Machinery Co., Ltd. , http://www.rotarykilnchina.com