Model NO.: GF3
Conditions of Use: Land Use
Usage: Common Units, Standby Unit
Landuse Type of Unit: Ordinary
Excitation Mode: AC Rotating Exciter
Fuel Tank Capacity: 8hours or More as Required
Controller: Smartgen Deepsea, Meters
Engine Type: Perkins
Certificate: Ce, ISO, EPA, Soncup
Warranty: 12months or 1000 Running Hours
Trademark: YABO
Transport Package: Plywood Case
Specification: 1650*1150*1600mm
Origin: U. K., India, China
HS Code: 85021100
Yuchai Engine introduction:1. Smart canopy design as Denyo type.
2. orign in China with high performance
3. Spare Parts free within 1 year ganrantee.
Options for diesel geneator:
1) AMF + ATS
2) controller
3) silent canopyÂ
4) trailerÂ
SPECIFICATIONS:
| Genset Model | GF3-140KW | |
| Type | Silent(Sound proof) | |
| Rated Output Power | 140KW/175KVA | |
| Standby output power | 154KW/182KVA | |
| Voltage (V)Â | 230/400V | |
| PHASE | Three phase   | |
| Controller | Digital | |
| Frequency(HZ) and Speed | 50HZ,1500rpm | |
| Size (mm)Â | 2800*1100*1550 | |
| Weight (Kg)Â | 2000 | |
| Engine        | Model | YC6A230L-D20 |
| Brand | YUCHAI | |
| Prime Power(KW/KVA) | 155/193 | |
| Stanby Power(KW/KVA) | 170/212 | |
| Frequency(HZ) and Speed                  | 50HZ,1500rpm | |
| Speed Governor | Machanical type | |
| Engine Type | Vertical,in-line,water-cooled,four stroke | |
| Aspiration Type | Turbocharged | |
| Cylinder-Bore*stroke (mm)Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â | 6-112x132 | |
|
Displacement(L) |
7.25 | |
| Compression Ratio | 15:1 | |
| Minimum Fuel Consumption (g/kW·h) | ≤195 | |
| oil copacity (L) | 22 | |
| Â Starting | Electronic | |
| Alternator | Model | SLG274G |
| Rated Output Power | 144KW/1180KVA | |
| Standby output power | 158KW/198KVA | |
| Power Factor | 0.8 | |
| Voltage control | AVR | |
| Frequency(HZ) and Speed                  | 50HZ,1500rpm | |
| TYPEÂ | Copy stamford,Three phase (Brushless) 400VÂ Â Â Â Â | |
OUR WORKSHOP:
A processing center, CNC lathes , milling machines, grinding machines, etc. , following a precision machining parts, the machine with advanced processing equipment andtesting equipment.Â
Quality Inspection:Â
 the test items before delivery are mainly as follows:
1) Â Professional 8 Hours test on 25%, 50%,75%, 100%, 110% load before delivery.
2) The noise level is tested. We used good muffer and design and foam to reduce the noise.
3) Â All of the meters on the control panel shall be tested.
4) Â The appearance of the genset and all of the label and nameplate shall be checked.
Container Loading:Â
Warranty
12 months or 1000 running hours from shipment date.If the quality problem arise during the warranty period, and verified the problem is caused by our genset-body instead of external or natural reasons.we will supply the relevant spare parts free of charge for maintenance;After the warranty period, we can supply the required spare parts for you under cost prices.
Â
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. KM or HM lock nuts with appropriate locking devices are suitable.
Recommends using a hydraulic nut to press the withdrawal sleeve into the bearing bore, as a considerable amount of force is required to overcome the friction between the bearing, sleeve and shaft.
Withdrawl Sleeve,Bearing Withdrawl Sleeve,Shaft Protecting Sleeve,Carbide Withdrawl Sleeves
Ningbo Ritbearing Imp & Exp Co.,Ltd. , http://www.ritbearingchina.com